Silicone Sealant
Sealex Sx-8000
Sealex Sx-8000
Non-stain weather seal neutral cure silicone sealant with +/- 50% movement capability
Sealex Sx-8000 is a non-stain neutral cure silicone sealant tested to ASTM C1248-08(2012) Standard Test Method for Staining of Porous Substrates by Joint Sealants. Sx-8000 is ideal for used on ACP (Aluminum Composite Panels), marble, granite and masonry joints where non-stain specifications are required. Custom colors are also available upon request.
- Non-stain silicone sealant conforms to ASTM C1248
- Less dirt pick-up
- Custom color available
- Movement capability of +/- 50%
- Non-corrosive, Non-Shrinkage
- Low VOC (LEEDs Green Building Standards)
- Aluminum Composite Panels (ACP) expansion joints
- Marble, granite and masonry joints
- Metal sheets and metal roofing
- Window and door perimeter joints in high rise buildings
Storage
Store at a dry place away from moisture and direct sunlight below 35⁰C.
Packaging Size
- Each foil/sausage contains 600ml
Uncured Sealant – Tested at at 25 C and 50% RH
| TRACK-FREE TIME | 20 min. or less. |
| FLOW,SAG OR SLUP | Non-sag |
| WORKING TIME (TOOLING) | 15 min.(Before sealant skin forms.) |
| CURING TIME (3 mm. BEAD) | 24 hours |
| EXTRUSION RATE | 33.5 ml / min |
Cured Sealant – After 21 days at 25 C and 50% RH.
| DUROMETER, SHORE A | 39 points |
| TENSILE STRENGTH (ASTM D412) | 1.8 Mpa |
| SERVICE TEMPERATURE | – 50 °C to + 150 °C |
| MOVEMENT CAPABILITY | ±50 % |
| PEEL STRENGTH (ASTM C794) | 125.7 N/25 mm. (Aluminium) |
| STAIN TEST (ASTM C1248) | No surface stain (Limestone Substrate) |
 |
| Aluminium Sealant Sausage Gun Aluminum cartridge caulking gun, 600 ml size |
LEED 2009 for New Construction and Major Renovations : Low Emitting Materials (Section 4.1), SCAQMD rule 1168 (2005)
ASTM D 2369 EPA Method 24 VOC content 46g/l or 3.6%
 |
 |
 |